Anaerobic glue-sealant of high durability unigerm-8 in Ufa online-store IPK Yumeks, OOO | Buy Anaerobic glue-sealant of high durability Unigerm-8 Ufa (Russia) | IPK Yumeks, OOO : Allbiz
Premium Standard
Reviews: 3
IPK Yumeks, OOO
+7 (347) 275-25-10
Anaerobic glue-sealant of high durability Unigerm-8
  • Anaerobic glue-sealant of high durability Unigerm-8

Anaerobic glue-sealant of high durability Unigerm-8

In stock
Country of manufacture:Russia
  • Cash,
  • Non-cash,
  • Visa/Mastercard,
  • Cash on delivery
  • In detail
TU 2257-516-00208947-2009 (amendment 1)
For fixing, a kontrovka, consolidation of one-piece threaded and smooth connections in the industry.
Sealant is intended for work in the conditions of vibration.
Tiksotropny anaerobic glue-sealant of high durability UNIGERM-8 is cured in narrow gaps
metal products at violation of contact with air oxygen.
Special characteristics
- Sealant is applied to latching, sealing, a kontrovka of smooth and threaded connections from
various metals and alloys (kadmirovanny, galvanized, anodized, fosfatirovanny, etc.).
- Sealant possesses the accelerated hardening and can be applied without activator that allows
to use it in conveyor productions at assembly of various knots and details.
- Sealant is tiksotropny that interferes with spontaneous running off of material from carving
surfaces when drawing.
Collected knots and details have chemical and thermal oil products, gases resistance,
to solutions of acids and alkalis.
Range of temperatures
- operation From -60 °C to +150 °C
- quickly to +200 °C (1 hour)
Application conditions
Standard carving (metric, pipe, conical, etc.)
Metric max. M80, gap no more than 0,30 mm.
Development of material and its production P ISO is certified in accordance with GOST
9001-2008 (ISO 9001:2008). Certificate No. ROSS RU.IF05. K00093.
Properties of liquid material
Chemical basis Dimetakrilovy air of glycol
Appearance Uniform liquid from light-till dark green color
The seeming viscosity on Brukfilda
at a temperature (25,0 ±0,2) °C, A/5/10 8000-25000 mpas
A/5/20 5000-15000 mpas
Flash temperature
in an open crucible> 85 °C
Ignition temperature> 95 °C
Spontaneous ignition temperature> 402 °C
Polymerization time
Durability on carving couple M10 bolt nut:
(at a temperature of 20-25 °C) - manual durability - in 10-20 min.
- full hardening - in 5-12 hours
Properties of the cured material
Durability when unscrewing in 5 hours of 10-14 MPas
Durability at axial shift in 24 hours of 16-25 MPas
Durability at a separation of 20-25 MPas
The material Durability Set (in % of full) through
0,5 p.1 p. 4 of h 24 h.
Steel of Art. 40 65 90 100
Galvanized steel with hromatny browning 15 65 85 100
Constructional steel with phosphatation 40 80 100
Residual durability, % from initial, after influence
+ 150C within 1000 hours 100
+ 200C (24 h; 48 h) 100 and 40
- 60C within 24 hours 100
10 thermal shocks from-60 to +150 °C at endurance of 2 h.
at each temperature 100
At 40 °C, 98% humidity, 30 days 100
sea water within 30 days 95
Chemical firmness of the cured material
Residual durability, % from initial, after influence
the A-40 antifreeze at 110ºС within 130 hours 80
lubricating oil at 130 °C within 130 hours 80
Safety requirements
Fire safety Belongs to group of combustible substances.
The class of danger of material Belongs to substances 4 classes of danger.
Working conditions Supply and exhaust ventilation.
Overalls - according to "Branch norms".
Near the place of work with sealants availability of naked flame is not allowed
Utilization unsuitable to the SanPiN and the joint venture
discharge of a product in the sewerage or sewage Is forbidden to use of sealants.
Transportation and storage
Packing Polyethylene bottles from 100-500 cm ³.
Coefficient of filling of a bottle 0.6
Transportation (look) Railway, automobile, sea or air
Protection from a sunlight is obligatory. Temperature at
to transportation no more than +30 °C.
Period of storage and conditions
Warranty period of storage - 12 months. Sealants have to be stored in the closed container of the enterprise -
the manufacturer in the covered, dry, heated warehouse in the conditions excluding hit
moisture and direct sunshine, at a temperature no more than +30 °C.
Contact with metal and hit of metal impurity in a bottle with sealant is not allowed.
Sealants at operation and storage do not emit harmful substances in concentration dangerous for
human body.
Recommendations about application and storage
Working surfaces of details need to be cleared and degreased gasoline, toluene or acetone,
the substances which are not containing nitrites. Glue-sealant is a ready-made product, it is applied on a carving
bolt in the quantity necessary for filling of a profile of a carving. It is possible to use a dropper
bottle, brush, special batchers. It is allowed to pour sealant from packing of the manufacturer in
pure working polyethylene container. In process of an expenditure of glue-sealant it is supplemented following
in the portion. The return discharge of a product from a working container in packing of the manufacturer is forbidden.
Country of manufacture:Russia
Information is up-to-date: 21.01.2020
Shipping method
Payment method

Read more

Unbelievable price on Anaerobic glue-sealant of high durability Unigerm-8 in Ufa (Russia) company IPK Yumeks, OOO.